JHCI-101BS-V3 (LAB&TEST) eng

LED Lamp Cure Machine

JHCI-101BS-V3 (LAB&TEST)

JHCI-101S-V2
JECO split-type curing machine is suitable for the curing process for UV bonding of Housing assembly and IR filter in the manufacturing process of cellular phone camera module (VCM, VCA, MOBILE CAMERA MODULE).
Feature
– Universal type small-size UV curing machine.
– One lamp is used.
– The machine can be equipped with metal halide lamp or mercury lamp.
– Small-type that can be used in a small space.
– LED indicator alarms the lamp replacement time.
SPECIFICATION
ITEM DESCRIPTION
 SYSTEM DIMENSION -Cure Machine : 850(W) *480(D)*550(H)
-Power Case : 320(W) *420(D)*320(H)
CURING WIDTH 100(mm)
 INPUT VOLTAGE  220V, 단상, 60 Hz or 50Hz
 LAMP TYPE  Hg or Metal  UV LAMP – 1EA
 LAMP ARC LENGTH 125 mm
 TOTAL CONSUMTION 1 KW / LAMP
 WAVELENGTH Hg-Peak : 365nm, Metal : 320~420nm
 IGNITION TIME  3 MINUTE
 REFLECTOR  COLD MIRROR
 MAIN SWITCH  MAIN POWER ON/OFF SWITCH
 LAMP POWER  LMAP POWER CONTROL ON/OFF SWITCH
General Details
JECO split-type curing machine is suitable for the curing process for UV bonding of Housing assembly and IR filter in the manufacturing process of cellular phone camera module (VCM, VCA, MOBILE CAMERA MODULE).
In addition, in the event of adding the pre-cure process at the lower part of the housing assembly to improve the product quality, it may obtain the effect of increasing extraction force amounting to maximum 15N compared with the existing IR attach process. There occurs no additional cost as the same curing machine and jig are used without any change in the layout.
UV bonding is also applicable to the SUB process [bonding of coil and FPCB (York area)], which can be done by the curing machine for IR attach purpose.
This UV in-line type UV curing machine is applicable in a variety of applications to SUB and MAIN process of the VCM process using the same equipment. Therefore, it may guarantee production speed and product quality with a minimum investment cost.
Even in case of any change in model that may occur later, it is not necessary to be modified in addition providing economic and efficient advantage.
It effectively supplemented the problems such as occurrence of foreign substance, temperature, etc. when being installed in the clean room based on a great number of delivery histories which can contribute to improvement of production yield rate. Therefore, the Machine is greatly competitive compared with the equipment supplied by the others.
Feature & Advantage
– Universal type small-size UV curing machine.
– One lamp is used.
– The machine can be equipped with metal halide lamp or mercury lamp.
– Small-type that can be used in a small space.
– It enables control of illuminance and amount of light with the speed of belt and height controller.
– LED indicator alarms the lamp replacement time.
– It enables UV curing for general electronic product as well as light product.
– Simple manipulation.
– It provides an excellent maintenance because UV lamp can be easily replaced.
– Height of upper lamp house can be freely controlled.
– Height of lamp house can be adjusted after lamp is turned off and cooled down sufficiently.
Detail
p15