JHCI-302TC (LCD/OLED MATERIAL) eng

LED Lamp Cure Machine

JHCI-302TC (LCD/OLED MATERIAL)

JHCI-302C
JHCI-302C produced as an ultra-low temperature UV curing machine is designed for UV curing in a low temperature in a variety of film, PC, and PET manufacturing process. Through the JECO’s own adsorption system (AIR SUCTION), JECO developed the temperature maintenance system that may keep ultra low temperature of 40 degree or less while maintain a high amount of light.
Feature
– UV curing machine for PET film and shin sheet.
– Easy to replace conveyor belt.
SPECIFICATION
GENERAL SPECIFICATION
ITEM DESCRIPTION
 SYSTEM DIMENSION 1700 mm (L) x 780 mm (W) x 1900 mm (H)
 SPEED CONTROL  MOTOR SPEED CONTROL
CURING WIDTH 300mm
BELT SIZE 330mm
 INPUT VOLTAGE ORDER MADE
 LAMP TYPE  MERCURY OR METAL UV LAMP 3 KW – 2 EA
 LAMP ARC LENGTH  360 mm
 TOTAL CONSUMTION 3 KW / LAMP
 WAVELENGTH  320~ 420 nm
IGNITION TIME  3 MINUTE
 REFLECTOR  COLD MIRROR
 MAIN SWITCH (NFB)  MAIN POWER ON/OFF SWITCH
 LAMP AMPERE METER  DISPLAY LAMP’S CURRENT
LAMP TIME CHECK METER DISPLAY LAMP’S USED TIME
 START SWITCH CURING START
 COLOR  STANDARD (IVORY) OR CUSTOM COLOR
OPTION
ITEM OPTION
HOT MIRROR (152X52X2.2T) (OPTION)
General Details
JHCI-302C produced as an ultra-low temperature UV curing machine is designed for UV curing in a low temperature in a variety of film, PC, and PET manufacturing process. Through the JECO’s own adsorption system (AIR SUCTION), JECO developed the temperature maintenance system that may keep ultra low temperature of 40 degree or less while maintain a high amount of light.
JECO Ion Blower upgraded the quality by solving the unbalance of temperature between the product inlet area and the product outlet area. In addition, with lamp height controller, cold mirror, IR filter, etc. equipped as basic specification, it minimized additional expense.
Feature & Advantage
– UV curing machine for PET film and shin sheet.
– With an adsorption fan mounted on the lower area, it enables to cure the product without its blowing off.
– UV curing system used for curing the product sensitive to temperature.
– Teflon mesh belt instead of flat belt is used.
– Buzzer sounds when it reaches lamp replacement time.
– It enables UV curing for general electronic product as well as light product.
– Simple manipulation.
– Easy to replace conveyor belt.
– It provides an excellent maintenance because UV lamp can be easily replaced.
– Height of upper lamp house is freely and simply controlled owing to its handle attached.
– Height of upper lamp house can be adjusted with the lamp turned on.
– Lamp height indicator is mounted being easy to refer to the height of lamp.
– Maintains a low temperature for its high intensity of irradiation.
Detail
p20