JHCI-424TC-UD (PCB/CAMERA MODULE both-side hardening) eng

LED Lamp Cure Machine

JHCI-424TC-UD (PCB/CAMERA MODULE 양면경화)

JHCI-424C
UV both-side curing machine JHCI-424TC-UD enables to cure lower part as well as upper part performed in the PCB, screening printing coating processes. In case of existing UV system, upper and lower part curing system are split causing a lot of burdens in the facility investment cost and occupation of broad setup space.
Feature
– UV curing machine that can cure both sides of PCB.
– With each UV lamp mounted on upper and lower parts, it enables to cure both sides simultaneously in single equipment.
SPECIFICATION
GENERAL SPECIFICATION
ITEM DESCRIPTION
 SYSTEM DIMENSION  Cure Machine : 2480W) *1090(D)* 1610(H)
 CURING WIDTH 600mm
 INPUT VOLTAGE ORDER MADE
 LAMP TYPE Me or Hg  UV LAMP– 4EA
 LAMP ARC LENGTH  700 mm
 TOTAL CONSUMTION 4.2KW / LAMP
 WAVELENGTH 320~ 420 nm(Peak : 365nm)
 IGNITION TIME 3 MINUTE
 REFLECTOR  COLD MIRROR
 HOT MIRROR (152X52X2.2T) (OPTION)
 MAIN SWITCH (NFB)  MAIN POWER ON/OFF SWITCH
 LAMP AMPERE METER  DISPLAY LAMP’S CURRENT
 LAMP TIME CHECK METER DISPLAY LAMP’S USED TIME(TOUCH PANEL)
 LAMP ON  DISPLAY UV LAMP ON(TOUCH PANEL)
LAMP POWER LMAP POWER CONTROL(TOUCH PANEL)
 SHUTTER ON/OFF  MAIN SHUTTER CONTROLL(TOUCH PANEL)
SPEED CONTROLLER CURE SPEED CONTROLL(TOUCH PANEL)
 COLOR  STANDARD (IVORY) OR CUSTOM COLOR
OPTION
ITEM OPTION
UV SENSOR UV 200
HOT MIRROR QUARTZ COATING
General Details
UV both-side curing machine JHCI-424TC-UD enables to cure lower part as well as upper part performed in the PCB, screening printing coating processes. In case of existing UV system, upper and lower part curing system are split causing a lot of burdens in the facility investment cost and occupation of broad setup space. By improving such irrationality of existing process and obtaining the effect of automated production process, it enables to reduce management cost, decrease the number of workers and improve the production process. As a precise and homogenous irradiation on both upper and lower parts by UV curing machine is available, it solves the defect rate of non-curing on the lower part contributing to the improvement of quality. In addition, its compact design makes it easy to facilitate the proper use of space. UV metal, mercury, or gallium lamp can be mounted on any part either upper or lower, which carries a great advantage in coping with the coating liquid.
Homogenity for upper and lower parts can be monitored through application of UV sensor system, which contributes to the effect of reducing the defect rate remarkably.
Feature & Advantage
– UV curing machine that can cure both sides of PCB.
– With each UV lamp mounted on upper and lower parts, it enables to cure both sides simultaneously in single equipment.
– Using UV both-side curing machine, it may shorten work process and work space.
– Roller type that minimizes damage to PCB substrate.
– Buzzer sounds when it reaches lamp replacement time.
– Interrupting heat applied to the product, it inhibits thermal deformation.
– With UV sensor mounted, it may check UV curing condition at all times.
– It enables to adjust the amount of light as well as intensity of UV irradiation to 3 steps.
– It provides an excellent maintenance because UV lamp can be easily replaced.
Detail
p19