SBD-A100 dispenser is epoxy, adhesive material such as controlling the quantity of discharge and the discharge condition of Controller.
SBD-A100 dispenser is epoxy, adhesive material such as controlling the quantity of discharge and the discharge condition of Controller.
- SBD-A100 is that control quantity and status of adhesives.
- Control air pressure in detail
- Fluid drip prevention vacuum mechanism comes as standard
- Have Digital systems for control
- Easy to set up with automation
- Applying materials are low and high velocity
- Easy to control quantity of adhesive by setting time (Start at least 0.01 sec)
- SBD-A100 has storage device that is help to easy work
GENERAL SPECIFICATION
| ITEM | DESCRIPTION |
|---|---|
| Power | AC220V±10% 50/60Hz |
| POWER CONSUMPTION | 1.5A(MAX) |
| CONTROL METHOD | ELECTRIC PNEUMATIC CONTROL CIRCUIT |
| RANGE OF AIR PRESSURE | 0.05~0.7MPa (0.2~7.0kg f/㎠) |
| RECOMMANDED SUPPLYING AIR PRESSURE | OVER 0.7MPa (MAX:0.99Mpa) |
| RANGE OF SHOT TIME | 0.01~99.9sec |
| DISPENSING MODE | Time/Steady |
| VACUM FUNCTION | BASIC |
| INPUT & OUT PUT SIGNAL | *INPUT: NO CONTACT OR CONTACT POINTS *OUTPUT: CONTACT POINTS |
| OPERATING CAPACITY | 600 cycle/min |
| TEMPERATURE | +5℃~+40℃ |
| EXTERNAL SIZE | (W)160×(D)141×(H)62 |
| WEIGHT | 1.8kg below |
